| 113A |
2 |
Adjustable wrenches 6″ and 10″ |
| 115A.100 |
1 |
Pin wrench |
| 134A.18 |
1 |
Pipe wrench |
| 138A.18 |
1 |
Strap wrench 4″ |
| 167A |
3 |
Outside-circlip® pliers 13 – 18 – 23 |
| 169A |
3 |
Inside-circlip® pliers 13 – 18 – 23 |
| 181A.25CPE |
1 |
Lockable multigrip pliers |
| 181A.30G |
1 |
Lockable multigrip pliers |
| 185.20CPE |
1 |
Sheathed straight half-round nose pliers |
| 187.18CPE |
1 |
Sheathed combination pliers |
| 188.16CPE |
1 |
Sheathed flat-nose pliers |
| 189.17CPE |
1 |
Sheathed round-nose pliers |
| 191A.18EL |
1 |
Low-effort cutters |
| 192.16CPE |
1 |
Piano wire diagonal cutters |
| 195.20CPE |
1 |
Sheathed angled half-round nose pliers |
| 200H |
2 |
Riveting hammers 24 and 32 mm |
| 208A.32CBA |
1 |
Interchangeable-tip mallets |
| 212A.40 |
1 |
Dead-blow hammer |
| 221.227J2 |
41 |
Tap and die set (in a case) |
| 222A.TJ19 |
19 |
Box set of drill-bits 1 to 10 mm |
| 231 |
1 |
Three-square scraper |
| 234 |
1 |
Scriber |
| 237.A |
1 |
Thread restoring tool |
| 239 |
1 |
Refrigeration” flaring tool (in a case) |
| 239.EA |
1 |
Inch dies |
| 245.J2 |
26 |
Set of gasket punches in a case |
| 247.G |
5 |
Sheathed nail-sets: 2 – 3 – 4 – 6 – 8 mm |
| 249.G |
5 |
Sheathed drift punches set: 2 – 3 – 4 – 6 – 8 mm |
| 256.4 |
1 |
Precision centre punch 4 mm |
| 257.G |
1 |
Sheathed automatic centre punch |
| 263.18 |
1 |
Chisel |
| 265.20 |
1 |
Constant-profile cape chisel |
| 269 |
1 |
Crowbar |
| 285.JS10 |
10 |
Set of stud extractors |
| 31.JE6T |
6 |
Roll set of low profile open-end wrenches 8 to 19 mm |
| 311B.60 |
1 |
Level with protractor dial |
| 334B.35 |
1 |
Tube cutter 3 to 35mm |
| 374A.20 |
1 |
Double-action oil can |
| 39.JE10T |
10 |
Roll set of short combination wrenches 3.2 to 11 mm |
| 401.MT |
1 |
Extra-long flat-nose precision pliers |
| 403.MT |
1 |
Precision angled half-roundnose pliers |
| 405.12MT |
1 |
Precision diagonal cutters |
| 40LA |
4 |
Long combination wrenches 33, 35, 36, 38 mm |
| 43.JE5T |
5 |
Roll set of flare-nut wrenches 7 to 19 mm |
| 44.JE12 |
12 |
Open-end wrenches 6 to 32 mm |
| 440 |
6 |
Combination wrenches 26 to 30 and 32 mm |
| 440.JE18 |
18 |
Combination wrenches 6 to 24 mm |
| 440.JU12 |
12 |
Combination wrenches 1/4″ to 15/16″ |
| 449.Z3A |
1 |
Crimping plier and terminal set |
| 495A.22EL |
1 |
Heavy-duty end nippers |
| 501 |
1 |
Long-nose lock-grip pliers |
| 507A |
1 |
Compact lock-grip pliers |
| 509 |
1 |
Compact lock-grip pliers |
| 521.200 |
1 |
Sliding jaw lock-grip clamp |
| 603F |
1 |
Hacksaw frame |
| 668B.8 |
10 |
Bimetal hacksaw blades |
| 701B |
1 |
Multifunction tester |
| 777B.230 |
1 |
Inspection lamp |
| 804 |
1 |
Feeler gauge, 19 blades |
| 809.J2 |
8 |
Measuring and scribing instrument kit |
| 827B |
1 |
Magnetic retriever |
| 82H.JP9A |
9 |
Sleeve set of hexagonal keys: 1.5 to 10 mm |
| 82H.JU10 |
10 |
Roll of offset hexagonal keys 1/16″ to 3/8″ |
| 830A.10 |
1 |
Ratchet tool-holder |
| 830A.10L |
1 |
Long ratchet tool-holder |
| 834.R2 |
1 |
Articulated mirror |
| 83SH.JP9A |
9 |
Sleeve set of spherical head hex keys 1.5 to 10 mm |
| 840.1 |
1 |
Electricians knife with wire stripper |
| 841 |
1 |
Electricians scissors |
| 84E.J1 |
5 |
Case-set of nut spinners |
| 883B |
1 |
Right-cut scroll shears |
| 887A |
1 |
Nibblers |
| 89.JP8A |
8 |
Torx® keys no. 10 to 45 |
| 893.316 |
1 |
Locking tape measure 3 m |
| 94A.JE13T |
13 |
Roll set of nut spinners 3.2 to 14 mm |
| 980C |
1 |
Serrated shears |
| 985761 |
1 |
Automatic wire cutter-stripper |
| 990.B1 |
1 |
Bolt cropper |
| 996.5 |
1 |
Steel cable cutters |
| A.VE |
3 |
1,000 V insulated screwdrivers slotted head 3.5×100 – 4×100 – 6.5×150 mm |
| AEF.J1 |
5 |
Case set of Micro-Tech® screwdrivers |
| AF |
1 |
Screw starter for slotted heads |
| AN |
5 |
Screwdrivers for slotted heads: 3.5×75 – 4×100 – 5.5×100 mm and short: 4×35 – 6.5×35 mm |
| AND |
3 |
Screwdrivers for Pozidriv® PZ heads no. 0-1-2 |
| ANF |
2 |
Screwdrivers for slotted heads 6.5×150 – 8×200 mm |
| ANP |
5 |
Screwdrivers with Phillips® PH 0-1-2 head and short: 1×35 – 2×35 mm |
| AP.VE |
2 |
1,000 V insulated screwdrivers Phillips® PH 1×100 – 2×125 |
| AP6X80 |
1 |
Square punch |
| AS.12LTP180T2 |
12 |
Wallet set of needle files, 180 mm |
| AV.HT1B |
1 |
Voltsage tester screwdriver 90 to 480 Volts |
| AWDH3X150 |
1 |
Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| AWH10X175 |
1 |
Hexagonal blade screwdriver for slotted heads with hexagon shoulder |
| AWPH3X150 |
1 |
Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| DELA.1051.05 |
1 |
Rule 300 mm |
| K.432E |
16 |
3/4″ „truck” sockets and accessories: 30 to 55 mm (in a case) |
| NS.265M |
21 |
Impact screwdriver set with bits |
| NS.500A |
26 |
1/2″ impact sockets and accessories: 8 to 27 mm |
| R.40U |
11 |
Rack socket-set 3/16″ to 9/16″ |
| RL.NANO1 |
38 |
1/4″ sockets: 5.5 to 14 mm and accessories (in a case) |
| S.141A |
1 |
1/2″ long drive hinged handle |
| S.306A200 |
1 |
Torque wrench 40 to 200 Nm |
| S.40U |
7 |
Rack socket-set 3/8″ to 21/32″ |
| S.41U |
6 |
Rack socket-set 11/16″ to 1″ |
| S.440AP |
29 |
1/2″ Sockets and accessories: 8 to 32 mm (in a case) |
| STG |
5 |
Files |
| T5.L65 |
1 |
Trigger-release lock-grip pliers (with aluminium griping) |
| U.302 |
1 |
3-leg puller 6 to 80 mm |
| U.306A140 |
1 |
3-leg puller Ø 7 to 140 mm |
| U.306G2 |
3 |
Legs for inside application |
| U.306M |
1 |
Slide hammer |
| Y.RIV1 |
1 |
Riveting kit |
